Need to return your Holosun EPS Carry Red Dot to its default settings? It's a simple process. First, locate the tiny button on the side of the sight. Use a small point like a pen to press and hold this button for around ten seconds. You'll notice the red dot flash rapidly, indicating the reset process is in progress. Release the button and your Holosun EPS Carry Red Dot is now back to factory settings.
- Note that this will erase any adjusted settings you may have made.
- Always consult the official user manual for detailed instructions and specifications.
Resetting Your Holosun EPS Carry to Factory Settings
Need to your Holosun EPS Carry back to its initial settings? It's a simple process.
First, identify the control buttons on the side of your optic. Then, concurrently press and keep both the primary button and the auxiliary factory reset Holosun EPS Carry red dot button for roughly five seconds.
You'll notice a flashing light, indicating that your Holosun EPS Carry is recalibrating. Release the buttons and wait for the screen to stabilize.
Your Holosun EPS Carry is now back at its factory settings.
Reset Your Holosun EPS Carry
Need to Clear your EPS Carry? Performing a factory reset on your Holosun EPS Carry optic is a simple process that can optimize its functionality. This will re-initialize all custom settings and return the sight to its factory default. Remember, this action is irreversible, so ensure you back up any crucial customizations before proceeding.
- Before resetting your EPS Carry, double-check
- Familiarize yourself with the reset procedure outlined in your user manual
- Adjust your sight to your preferences
Return Your Holosun EPS Carry to Defaults: A Step-by-Step Guide
Your Holosun EPS Carry red dot sight is a fantastic tool for self-defense or range time. But rarely, you might need to bring it back to its factory settings. This can be beneficial if you're experiencing difficulties with your sight, or just want a fresh start. Thankfully, Holosun made the process of resetting your EPS Carry extremely easy. Here's a step-by-step guide to help you get started.
- First powering off your Holosun EPS Carry. This is important because any changes made while the sight is on won't be stored.
- After that, locate the small reset button on the bottom of your sight. It's usually covered by a rubber cap for protection.
- Employing a thin object like a paperclip or a pen, gently press and hold the reset button for about 5 seconds. You should see a change in the display, indicating that the sight is resetting.
- Let go of the reset button and wait for your Holosun EPS Carry to power on. Your sight will now be back to its factory settings.
Well done!
Get Your Holosun EPS Carry Running Again: Factory Reset Guide
Is your trusty Holosun EPS Carry giving you trouble? Don't fret! A factory reset could be just the ticket to reclaim its former glory. This simple procedure will reset all user settings and configurations, returning your red dot sight to its default state.
Here's how to perform a factory reset on your Holosun EPS Carry:
- Make sure your Holosun EPS Carry is turned off.
- Simultaneously press and hold both the function button and the power switch for approximately 7 seconds. You'll know it's working when the LED illuminates quickly.
- Release both buttons once the LED starts to blink a successful reset.
- It's ready to use now set to its factory defaults. You can begin configuring your sights as desired.
Let me know if you have any other questions about your Holosun EPS Carry or need help with any other settings!
Restore Your Holosun EPS Carry Red Dot Swiftly
To execute a factory reset on your Holosun EPS Carry Red Dot, you'll need to locate the settings panel. Using a small tool, hold and maintain pressure on the restore button for roughly 5 seconds. You'll see a change in the screen. This indicates that the reset operation is finished. Your Holosun EPS Carry Red Dot will now be set to its factory settings.
- Verify your battery is powered on
- Consult the user instructions for detailed instructions